unit load
英 [ˈjuːnɪt ləʊd]
美 [ˈjuːnɪt loʊd]
n. 成组（单位）货载
双语例句
- This is because the circumferential unit load at the pallet seating surface is directly proportional to the diameter of the seating area.
这是因为阀座垫板表面的圆周单位负荷与阀座面的直径成正比。 - Real-updating multivariate analysis for unsteady flows with ensemble Kalman filter The thermal power unit load system is an object with coupling and constraints.
水动力学模型与集合卡尔曼滤波耦合的实时校正多变量分析方法电厂负荷系统是一个有耦合和约束的多变量对象。 - This paper puts forward one kind of unit load scheduling method based on the hybrid particle swarm optimization algorithm.
在综合分析电力系统电压崩溃事故的基础上，提出了一种新的避免系统电压失稳的甩负荷方案。 - Auxiliary power unit load compressor
辅助动力装置负载压缩器 - The way of identifying the ability equipment are fixed unit load and guarantee value of product catalog.
确定设备能力的方法有单位负荷定额、产品目录保证值等。 - Application Research of Unit Load Control Using Total Radiant Energy of Boiler as Caloric Value Signal
以锅炉总辐射能作为热量信号的机组负荷控制应用研究 - Similarly, varying load conditions, as the unit load required to respond as quickly as possible, to stress the extent permitted margin shorten response time.
同样，变负荷工况下，为使机组尽快响应负荷需要，要在应力裕度允许的范围内缩短响应时间。 - Application of MAC based on double Hopfield Networks in unit load system
双Hopfield网络MAC算法在单元机组负荷系统中的应用 - The simulating result showed that when the unit load changes, the maximum dynamic difference of main-steam temperature drops 13.8%, the regulating time shortens 17%, and the control character is improved well.
仿真结果表明，在机组发生负荷扰动时，主蒸汽温度的最大动态偏差降低了13.8%，调节时间缩短了17%，其调节品质明显改善。 - The expression for the relation between the deform and the external force of progressive rate springs with variable arm length was established by using unit load method, and then the non-linear dynamics equations was given.
采用单位荷载法推导变撑臂渐硬性钢板弹簧变形和外力之间的关系式，进而推导出非线性动力学方程，然后采用多尺度法对方程进行求解。 - The Calculation, distribution, influential factors and range of bending moments on the mast flange local bending are analyzed theoretically. The curve of bending moments of the mast flange local bending under the unit load is presented also.
对翼缘局部弯曲弯距的计算，分布状况，以及影响因素和范围进行了理论分析，并给出了在单位力作用下翼缘局部弯曲弯矩的图表。 - Based on the characteristics of bolier turbine unit load process, a new algorithm of multivariable model predictive control is proposed.
针对现有预测控制方法在应用于单元机组负荷控制时存在的问题，并根据单元机组负荷控制的特点，提出了一种新的多变量模型预测控制算法。 - Design and Implementation of Optimized Dispatching Software System for Unit Load in Thermal Power Plant
火电厂机组负荷优化调度软件系统的设计与实现 - Multivariable model predictive control for thermal power unit load system
单元机组负荷多变量模型预测控制 - The Key Points of DEH System Control Strategy in a 600 MW Supercritical Unit Load Rejection Test
600MW超临界机组DEH系统甩负荷控制的关键点 - This paper gives indications in detail of the calculating method for the contact strength "KLloyd-coefficient" of the modern ship's gears and traces the development and particulars of the unit load method for the bending strength. Several coefficients are being discussed in the paper.
本文对现代船用齿轮接触强度KLloyd&系数计算法与弯曲强度单位载荷法的来龙去脉与特点作了较详细的说明，并提出了对若干系数的探讨。 - Fuzzy Identification Approach and Its Application to a Generating Unit Load System
模糊辨识方法及其在单元机组负荷系统中的应用 - Analysis and Tuning of Generating Unit Load Feedback Control System, as Turbine is Equipped with Power-Frequency Control System
汽轮机采用功频调节系统时，单元机组负荷反馈控制系统的分析和整定 - The concepts of load, unit load and loading factor are introduced.
介绍机械密封常用的密封面载荷、比载荷和载荷系数。 - Affect of Unit Load Change on Superheater Safety
机组负荷变化对过热器安全性的影响 - The Application of Turbine Speed-Power Control System to the Generating Unit Load Control System
汽轮机功频调节系统在单元机组负荷自动控制系统中的应用 - The Application of Model Predictive Control in Thermal Power Unit Load
预测控制在单元机组负荷控制中的应用 - Analysis is made on variable property of air-conditioning load, study is made on energy regulation method and COP varied regularity with rotating speed of engine-driven air-conditioning system, interpret the unit load distribution.
对空调负荷的变化特性进行了分析，研究了发动机驱动空调的能量调节方法及性能系数随转速的变化规律，对机组的负载匹配进行了说明。 - The unit load system is a two-input and two-output multivariable plant with coupling and inertia.
单元机组负荷系统是具有耦合的两输入两输出多变量系统，具有较大的惯性。 - This paper analyzed the three devices by mathematical modeling and date fitting ways, we established the mathematical relationship between energy consumption and desulfurization efficiency and unit load. Then we obtained the performance curve of these equipments.
本文利用数学建模和数据拟合的方法对三个主要耗能设备进行分析，建立起设备运行能耗、脱硫效率和机组负荷三者之间的数学关系式，并绘制出设备运行能耗特性曲线图。 - Basing on principle of virtual work and unit load method, this thesis developed the quasi static time difference method to analytically calculate the torsional deformation and time difference between signals derived from upstream and downstream of measuring tube.
本文发展了上述准静态式时间差推导方法，基于虚功原理和单位载荷法，解析计算了不同流速下测量管的扭转变形程度，并进而计算了不同流速下测量管上下游信号的时间差。 - DEH system has already become an important component of unit load system and even entire power plant controls.
DEH系统已成为单元机组乃至整个电厂控制的重要组成部分。 - The supercritical power unit load process is nonlinear, time-variation and multivariable coupling.
超临界参数机组负荷生产过程是一个非线性、参数时变、多变量耦合的被控对象，在保证锅炉和汽轮机稳定运行的同时，还要考虑它们之间动态特性差异，实现锅炉、汽轮机协调控制。